NCSIMUL

Announcing the rejuvenated SPRING Technologies Facebook account

2012-02-29T05:42:00.000-08:00

SPRING Technologies would like to announce the rejuvenated Facebook account.

We hope that everyone will go and "Like" the page and see more all of the activities SPRING Technologies will be working on for 2012.

Go to: www.facebook.com/springtech and click LIKE.

SPRING Technologies showcases NCSIMUL SOLUTIONS and Innovation at the INDUSTRIE PARIS 2012 show

2012-02-25T05:57:00.000-08:00

SPRING Technologies announced today that it will be at Industrie Paris 2012, one of France’s leading technology exhibitions, to be held from March 26 to 30 2012 at the Parc des expositions de Paris-Nord Villepinte - Halls 4 and 5A (http://www.industrie-expo.com/).

SPRING understands just how business-critical innovation is for industry today and has demonstrated its ability to develop solutions for tomorrow by participating in France’s 2012 Innovation Trophies.

Visit booth 5N57 to see the complete NCSIMUL SOLUTIONS offering for the simulation and optimization of production processes and ramp up global productivity in your workshop.

For the complete story click here.

To get more information on the event click here

SIDEL Atlanta, a world leader in packaging solutions, choose NCSIMUL for their US production

2012-02-15T01:43:00.004-08:00

SIDEL, a world leader in packaging chose NCSIMUL because it was easy to use and the accuracy of time calculation. They ran a benchmark of NCSIMUL and other simulation packages but NCSIMUL finished ahead.

The group is using the system in different location around the world, so it made sense to use the same tool.

SPRING Technologies is extremely excited at the partnership with SIDEL.

For more information on SIDEL go to: www.SIDEL.com
For more information on NCSIMUL go to: www.NCSIMUL.com

SUPERIOR DRILLING PRODUCTS partners with SPRING Technologies

2012-02-13T08:01:00.000-08:00

SUPERIOR DRILLING PRODUCTS takes advantage of NCSIMUL capabilities to protect and get the best from their OKUMA Multus (millturn) and MU (5 axis).

SUPERIOR DRILLING PRODUCTS invested in NCSIMUL because the software was easy to use and very accurate in the simulation calculation in comparison to real world.

Superior Drilling Products is the most advanced PDC drill bit repair facility in the world. SDP has been an established service provider to the drill bit industry for the past 14 years, and continues to set the trend in repair technology.

Located in Vernal, Utah, Superior Drilling services the Rocky Mountain region for the world's largest drill bit supplier.

Nowhere in the world will you find a singular workforce with more experience related to drill bit remanufacturing than at SDP.

For more details on SDP go to: www.superiordrillingproducts.com

For more details on NCSIMUL go to: www.NCSIMUL.com

A review of 2011 and prospects for 2012 - A word from the CEO

2012-02-08T04:44:00.000-08:00

SPRING Technologies held its annual journalists meeting in Paris, January 19th. Mr. Gilles BATTIER, CEO of SPRING Technologies, presented some of the milestone facts and figures from 2011 as well as 2012 key prospects.

For a full report click here

Gilles Battier concluded by: Customer satisfaction first!

“SPRING is proving that innovative SMEs can play a part in the economic recovery in Europe, alongside the flagship groups. I care deeply about getting SMEs back to full health, because I believe that this is one of the solutions for the economic, local and social development that we so badly need if we are to preserve the international influence and prestige of French industry.

In addition to our double-digit growth forecast for 2012, we have three clearly defined goals:

Goal #1: Customer satisfaction; Goal #2: Customer satisfaction; Goal #3: Customer satisfaction.”

SPRING Technologies will present at WESTEC 2012

2012-01-24T06:16:00.000-08:00

WESTEC is Manufacturing. The region’s definitive manufacturing event

SPRING Technologies will be present at WESTEC 2012 from March 27th until March 29th 2012. It would be great if you could stop by and visit us.

Location: Los Angeles Convention Center

Booth: 2958

Time: Tue. 10.am-5.pm, Wed. 10.am-6.pm, Thur. 10.am-3.pm

For more information click here.

Looking forward to seeing you there.

Latest Reseller Webinars for 2012

2012-01-09T03:55:00.000-08:00

SPRING Technologies wishes you Happy Holidays and a Great Happy New Year

2011-12-23T02:10:00.000-08:00

SPRING Technologies | One Broadway Cambridge (MA) 02142 | +1 (617)401-2197
www.springplm.com | spring@springplm.com

Spring Technologies Users Group doubled its attendance this year (CUST 2011)

2011-12-22T06:42:00.000-08:00

The Third Annual Edition of Spring Technologies Users Group (CUST 2011) that was hosted at Astrium and Airbus Facilities was a huge success.

More than 60 attendees networking with their peers came; Last year 35 people attended only.
There were on-site visits dedicated to the Ariane 5 Space Launcher and Airbus A380 assembly facilities.
Many customer testimonials were gathered providing feedback on the new and improved Digital WorkshopTM portfolio solutions.
Live demonstrations took place to show the latest functionality of NCSIMUL and TOOL EXPERT, dedicated to shop-floor tools management.
SPRING Technologies shared their vision of the future of the Digital WorkshopTM: trends, corporate strategy and R&D investment.

For a more details click here

SPRING participated in Manufacturing.fr

2011-12-22T00:47:00.000-08:00

SPRING Technologies participated with Manufacturing.fr in a series of interviews and presentations

Please take a look at the 3 interviews / presentations on SPRING Technologies and its products presented by Olivier Bellaton (General Manager):

http://www.manufacturing.fr/news-video/t/automobile-aeronautique-mecanique-medical/25/

Interview 1: The latest in CNC Manufacturing Simulation with NCSIMUL (Plus loin dans la simulation avec NC Simul Spring Technologies)

Topics addressed: How to go further with NCSIMUL from SPRING Technologies? How to improve productivity of machines-tools with the last version of NCSIMUL? New enhancements to share experience and knowledge with the simulation between CAD/CAM department and the shopfloor (NCSIMUL PLAYER, NCDOC, OPTITOOL).

Interview 2: Conference on how to improve the productivity of machines-tools. (Comment améliorer la productivité de ses machines ?)
Some solutions with Olivier Bellaton , General Manager from SPRING Technologies, G.B, Application Engineer from DELCAM, D.R Business Development Manager from ABB.

SPRING Technologies presentation

NCSIMUL Tips and Techniques Session 2 : Detail the toolpath preview.

2011-11-30T04:47:00.000-08:00

NCSIMUL Tips and Techniques Session 2 : Detail the toolpath preview.

For more information go to: http://www.NCSIMUL.com

NCSIMUL Tips and Techniques Session 1 : Filter the Toolpath display

2011-11-29T14:49:00.000-08:00

NCSIMUL Tips and Techniques Session 1 : Filter the Toolpath display

NCSIMUL in action at the imX show

2011-11-18T23:03:00.000-08:00

imX was an industry-changing event that brought the manufacturing world a new level of knowledge transfer, interactive exhibits, and integrated educational sessions. Hear the insights that Brian Basillere, account manager, Spring Technologies has to offer regarding the newest products available.

For more videos from imX go to: http://www.onlineamd.com/spring-technologies-imx-11411.aspx

AREVA JSPM chose NCSIMUL and TOOL EXPERT because of its commitment to excellence

2011-11-11T03:01:00.000-08:00

JSPM, an AREVA subsidiary and world leader in mobile components for primary coolant loops, is introducing a CAMbased digital process. They choses NCSIMUL and TOOL EXPERT from Spring Technologies.

“Our commitments in terms of time frame and cost are such that we have to get our parts right the first time, eliminating all risks of breakage” - Franck COPIN, CAM Department Manager
at JSPM

Read the full story about why AREVA JSPM chose NCSIMUL and TOOL EXPERT. Click here

For more information on NCSIMUL go to: www.ncsimul.com

For more information on TOOL EXPERT go to: http://www.springplm.com/contenu.php?LANG=GB&ID=88

NCSIMUL will be present at the 2011 Mastercam Reseller Conference

2011-11-09T03:18:00.000-08:00

NCSIMUL will be present at the 2011 Mastercam Reseller Conference.

Date: November 10th - 11th 2011

Location: Tolland, CT

Make sure to look for the SPRING Technologies team and take a look at the latest products especially the Mastercam / NCSIMUL seamless interface.

For more information about the Mastercam / NCSIMUL interface go to: http://www.springplm.com/pdf/interface/mastercam_GB.pdf

Phoenix International uses NCSIMUL for 400 simulations a day

2011-11-01T05:08:00.000-07:00

Phoenix International (An Aluminium Extrusion Dies Company) has been using NCSIMUL since 2009. They use NCSIMUL for 400 simulations a day. They have 15 licenses of NCSIMUL and reduced the interruptions of workmanship down to one.

Find out more about the company and NCSIMUL.

For more information about this company go to: http://www.springplm.com/pdf/case_study/309GB.pdf

For more information on NCSIMUL go to: www.ncsimul.com

Edgecam will present the interface with NCSIMUL through World Wide Webinars

2011-10-22T00:32:00.000-07:00

SPRING Technologies is extremely excited at the amazing partnership with Edgecam.
Edgecam in partnership with SPRING Technologies will host 2 webinars.
Please take the time to register for any of the webinars below:

Webinar 1 - EDGECAM-NCSIMUL INTERFACE PRESENTATION | 20MIN

24/10/2011 10:00 (Paris)
24-Oct-2011 04:00 AM (New York)
24/10/2011 16:00 (Beijing)

Webinar 2 - EDGECAM-NCSIMUL INTERFACE PRESENTATION | 20MIN

24/10/2011 17:00 (Paris)
24-Oct-2011 11:00 AM (New York)
24/10/2011 23:00 (Beijing)

We look forward to seeing you there.

SMP Chose NCSIMUL because it gets the job done

2011-10-20T02:00:00.000-07:00

SMP designs and manufactures all its own products:

1 and 2-Axis CNC tables
5-Axis NC tool and cutter grinders
Floating chucks (reamer holders)

«Our Numaffut+ software is an ongoing development project, and we regularly develop a range of other in-house programs. Because NCSIMUL is able to directly decode the ISO program, we can use it to immediately simulate these new programs.»

Michaëlle FERRARI
Numaffut+ Product Manager, SMP software development department

Learn more : http://www.springplm.com/pdf/case_study/29GB.pdf

See why ADIXEN (Alcatel Vacuum Technology) bought NCSIMUL

2011-10-19T07:53:00.000-07:00

ADIXEN - Alcatel Vacuum Technology is the world leader in vacuum technology and leak detection. They bought NCSIMUL because it addressed the companies main needs.

NCSIMUL allowed Alcatel Vacuum Technology to increase its productivity drastically: machines are now always dedicated to produce and only for that purpose.
All tool path incidents are now solved upstream.
CNC Machines are started at night, without any operator monitoring the process.
NCSIMUL allowed Alcatel Vacuum Technology to develop even more complex and efficient programs.

For the complete story go to: http://www.springplm.com/pdf/case_study/28GB.pdf

Why ZF Group chose NCSIMUL over the competition

2011-10-17T04:05:00.000-07:00

The ZF Group (SPRING Technologies Customer), one of the first fifteen global automotive suppliers, known for its components for power transmissions, has decided to unify its tools of machining simulation by choosing NCSIMUL from SPRING Technologies.

Their criteria for choosing NCSIMUL over the competition:

- The homogenization of machining simulation solutions ;
- The integration of this new solution in the existing Information Systems (various different according to the country: SAP, Oracle, etc.).
- The ease of use and learning of the software by all operators in different production sites, all equipped with NC machines from 5 to 7 axes;
- The interconnection with the various CAM solutions used by the production plants;
- The ability to use 3D objects and integrate them into the simulation, as well as geometry, tools, attachments, workpieces, etc.. ;
- The opportunity to work with different NC machines and controllers;
- The importance of simulating the process of actual operation of the NC machine tool in ISO code;
- The interconnection between the solution and the CNC programming simulation systems already in place.

For more information on why ZF chose NCSIMUL go to: http://www.springplm.com/pdf/case_study/267GB.pdf

MAP offers its customers 95-98% rate of service

2011-10-16T04:58:00.000-07:00

Mécanique Aéronautique Pyrénéenne – MAP, is a company that specialises in precision engineering, providing services to leading aerospace players, OEMs and first-tier suppliers. MAP offers its customers expertise in a range of fields: machining for parts of all sizes, fine sheet metal work, boilermaking, assembly, and the design and production of tooling, notably punches, dies and moulds.

MAP installed SPRING’s “Digital Workshop” solutions, NCSIMUL and TOOL EXPERT, for machining simulation and cutting tool management. With this digital process in place, the ability to exchange information between departments enabled the company to optimise productivity and step up its rate of service to customers. MAP offers its customers a 95 - 98% rate of service, a record in its line of business.

Find out more by clicking here

Airbus started using NCSIMUL in the early 90’s

2011-10-13T06:37:00.000-07:00

Airbus started using NCSIMUL in the early 90’s. The result has been a win-win cooperation between a manufacturer and a software Editor who speak the same language… and we don’t mean G-CODE! We visited the Airbus production plant at Méaulte in the north of France to find out more.

Click here for the full story

For more information on NCSIMUL, go to: www.NCSIMUL.com

SPRING Technologies to attend CMTE in Nanjing China Oct 12-14 2011

2011-10-12T00:21:00.000-07:00

SPRING Technologies will attend and exhibit its latest solutions at the China Machine Tool Exhibition (CMTE) in Nanjing China.

Date: October 12 - 14th 2011

Address:
B3

Nanjing International Expo Center, Nanjing, China

http://www.cmte.cn/

Please take the time to pay them a visit to see how NCSIMUL insures the longevity of the CNC machine.

Companies Trust NCSIMUL to protect their machining investments.

2011-10-05T02:56:00.000-07:00

Largest Organizations in the world trust NCSIMUL to protect their machining investments.

Find out how by paying a visit to:

www.NCSIMUL.com

SPRING Technologies signs up SIDISA from Mexico

2011-10-04T00:32:00.000-07:00

SPRING Technologies is very happy to announce the partnership with SIDISA from Mexico. SIDISA will focus on sales and support for NCSIMUL throughout the country.

For more details on SIDISA, please feel free to go and visit them at www.sidisa.mx

For more information on NCSIMUL and how it can save you a bundle in Machine Simulation go to: www.NCSIMUL.com

SPRING Technologies partnership with CIMTECH

2011-10-03T00:16:00.000-07:00

SPRING Technologies has been partners with CIMTECH from Washington focusing on NCSIMUL sales and support. For more information on CIMTECH visit them at: www.multiaxis.com

NCSIMUL is a comprehensive machine simulation solution to address virtual CNC G-Code simulation of any machine of any complexity. For more information on NCSIMUL, visit: www.ncsimul.com

reThink Engineering (SPRING Reseller) will present NCSIMUL at Dayton AMTS

2011-09-30T23:14:00.000-07:00

reThink Engineering will present NCSIMUL at Dayton AMTS (Advanced Manufacturing and Technology Show)

The Advanced Manufacturing & Technology Show (AMTS) is the region’s ONLY annual show of its kind. It’s the future of the industry showcasing technologies, trends, products and solutions.

Address
Dayton Airport Expo Center
3900 McCauley Drive
Vandalia, OH 45377

Date: Oct 19 - 20, 2011
Time: 10:00 am - 8:00 pm

Booth: 404

For more information on Daton AMTS go to: http://www.daytonamts.com/
For more information on SPRING Technologies go to: http://www.ncsimul.com/

SPRING Technologies will attend SIANE in Toulouse, France

2011-09-30T22:41:00.000-07:00

SPRING Technologies will attend SIANE in Toulouse, France

Address:
Parc des Expositions de Toulouse
Rond point Michel Benech 31 030
Toulouse cedex 4 France

Booth: C02/D01, Hall 1

Date: Oct 11th - 13th 2011

Time:

Tue - 9:30 am - 6:30 pm
Wed - 9:30 am - 10:00 pm
Thu - 9:30 am - 5:00 pm

SPRING Technologies plans to showcase NCSIMUL and its other products to demonstrate how it can save customers money by simulating very complex machining virtually.

For more information on SIANE, please go to: http://www.salonsiane.com/

For more information on SPRING Technologies, please go to: http://www.ncsimul.com/

Messier-Dowty minimized risk to zero for scrapped parts and machine collision

2011-09-29T01:22:00.000-07:00

Customer Success Story

Messier-Bugatti-Dowty (a Safran group company), is the world leader in the design, development, manufacture and support of aircraft landing gear systems.

They chose NCSIMUL to check and validate all the ISO coded programs prior to using CNC machines.

NCSIMUL software mimics precisely every cutter movement so they were able to correct any programming errors or collisions before machining the actual parts. The biggest advantage using NCSIMUL is that they saved a lot of machine prove-out time, and the machines are kept busy on production work. They have also reduced the amount of programming errors, and minimized risk to zero for scrapped part and machine collision.

For more details click here

SPRING Technologies partnership with 3HTI

2011-09-28T03:16:00.000-07:00

SPRING Technologies has been partners with 3HTI from NJ to sell NCSIMUL throughout the following states:

3 HTi Locations:

Connecticut
Florida
Georgia
Massachusetts
Maryland
New Jersey
New York
North Carolina
Ohio
Pennsylvania
South Carolina
Virginia

Please feel free to visit 3HTI at www.3HTI.com to learn more about them and how you can benefit from their services.

SPRING Technologies signs up reThink Engineering Inc.

2011-09-27T03:47:00.000-07:00

SPRING Technologies signs up reThink Engineering Inc. out of Hamilton, Ohio. reThink Engineering has been in business for over 20 years focused on Machine Simulation, DNC, and everything in between.

Please feel free to visit them at: http://www.rethinkeng.com

SPRING Technologies started imX in Las Vegas with great success

2011-09-14T23:41:00.000-07:00

Sept 12th, 2011 - The doors opened to imX Las Vegas and the crowds started to gather. A bunch of engineers, designers, manufacturing people and managers headed over to the SPRING Technologies booth #2721 to understand what makes NCSIMUL such a great product.

The team presented the product and the underlying technology to impress the crowd.

Silvere Proisy (SPRING GM in the US) commented: "What makes our company and product unique is the collective effort of everyone involved. We have great software developers focusing on what customers want, we have great customer support to address any issues we might face, and we have a great sales team and resellers distributed throughout North America and really the world"

SPRING Technologies Team is preparing for imX in Las Vegas

2011-09-05T14:10:00.000-07:00

SPRING Technologies team is getting ready to exhibit at imX 2011.

imX 2011, will take place Sept. 12-14, 2011, in Las Vegas. imX will bring together industry leaders from companies large and small who recognize that only through education and collaboration can the nation's manufacturers thrive in today's global marketplace. Exhibitor, participant and other information is available at http://imxevent.com.

Location: Las Vegas Convention Center

Date: Sept 12-14 2011

SPRING Technologies Booth #2721

SPRING Technology plans to showcase their products (NCSIMUL) latest functionality that will allow customers to eliminate shop floor costly mistakes and increases company profitability

To get an invitation from SPRING to this event, please feel free to contact SPRING

E-mail to: contact_us@springplm.com or call 1-617-401-2197.